6 month rider wanting to go bigger - Page 3

MadFurai · 2011-08-19, 02:21 PM

I did notice that I was higher, but that wasn't why I cut the seat post. I actually had to stretch my calf to keep my feet on the pedals at the bottom of the rotation. It was such a stretch, that I was hurting my giblets just from riding normally on flat pavement. I am only 5'7" and (just found out) that my inseam is only around 31-32 inches with shoes on. The 24-inch Nimbus MUNI with 300mm post clearly states that you need a minimum 33 inch inseam. I'm actually glad I got the 300mm post, cause the 200mm probably would have been a little short. I think a 250mm post is just right for me (on this size). Anyway, after reading several threads on this site, I also realize that the rolling diameter of my 24-inch MUNI with the fat Leopard tire (at 30psi) is probably closer to 25 or 26 inches. My trainer UNI had a very small tire on it, so the jump is actually bigger than 4 inches IMO. Even though I've only been riding for 6 months, I was able to ride it immediately. It just feels weird and the 150 cranks (vs 125) are the hardest part to get used to for me.

maestro8 · 2011-08-19, 05:31 PM

Quote:

Originally Posted by MadFurai

6 month rider wanting to go bigger

I've heard Cialis or Viagra works wonders for this...

View Poll Results: Which size should I step up to? (have only ridden a 20-inch for 6 months)
24-inch (take baby steps)	1	7.69%
26-inch (everything in moderation)	7	53.85%
36-inch (go for the gusto, it's easy)	5	38.46%
Voters: 13. You may not vote on this poll

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[For Sale: USA] Free 24" to a new rider (North Carolina)	juggleaddict	Trading Post	6	2011-05-26 06:01 PM
Wanting to get a new set of wheel	Sycamore	Just Conversation & Introduce Yourself	14	2011-04-13 03:34 PM
How to go farther in the distance?	JohnC	General Unicycling Discussions	13	2011-01-11 07:49 PM
24" Miyata for sale or wanting to trade for a bigger wheel (28" Semcycle	David F Dodge	General Unicycling Discussions	2	2003-12-21 03:02 AM
Bigger seats for bigger balls?	AccordNSX	General Unicycling Discussions	2	2002-07-04 07:05 AM

2011-08-19, 02:21 PM	#31
MadFurai Skateboarder to Marine to Unicycler Join Date: Aug 2011 Location: Central Virginia Age: 42 Posts: 536	I did notice that I was higher, but that wasn't why I cut the seat post. I actually had to stretch my calf to keep my feet on the pedals at the bottom of the rotation. It was such a stretch, that I was hurting my giblets just from riding normally on flat pavement. I am only 5'7" and (just found out) that my inseam is only around 31-32 inches with shoes on. The 24-inch Nimbus MUNI with 300mm post clearly states that you need a minimum 33 inch inseam. I'm actually glad I got the 300mm post, cause the 200mm probably would have been a little short. I think a 250mm post is just right for me (on this size). Anyway, after reading several threads on this site, I also realize that the rolling diameter of my 24-inch MUNI with the fat Leopard tire (at 30psi) is probably closer to 25 or 26 inches. My trainer UNI had a very small tire on it, so the jump is actually bigger than 4 inches IMO. Even though I've only been riding for 6 months, I was able to ride it immediately. It just feels weird and the 150 cranks (vs 125) are the hardest part to get used to for me.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)