Unicyclist Community

home gallery forums webmail links map donate
Go Back   Unicyclist Community > Unicycling Discussion > General Unicycling Discussions

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 2008-01-19, 03:44 AM   #1
Val88
Aspiring Unicyclist
 
Join Date: Dec 2007
Location: Ottawa, ON, Canada
Age: 24
Posts: 82
New unicycler in need of more help

Hey all. I figured it would be foolish to bring back my old thread from the dead, so I may as well start a new one.

I've gotten to the point now where I can roll forward comfortably, can almost start idling, and am interested in practicing freemounting. The hallway in my house is much too small now to practice anything (not to mention too fragile), so this is mostly for the other Ottawa unicyclists. Where's the best place to practice this time of the year?

My second question, I have a Norco 20" MUni, completely stock except for the saddle. I'm going to assume it's built tough since it's meant for muniing, but I'm wondering how much torture it can take. I've heard it isn't the strongest out there, but should it be ok to handle drop after inevitable drop while practicing free mounting? I'm going to have to do it anyway, but I'm just wondering if I should put some money aside for new parts to replace the broken ones.

Thanks for any answers,

Val
Val88 is offline   Reply With Quote
Old 2008-01-19, 03:56 AM   #2
unibikeling
Vendetta Against Freestylers
 
unibikeling's Avatar
 
Join Date: Apr 2007
Location: Cold Spring, Stearns County, Minnesota, USA
Age: 20
Posts: 3,165
Send a message via AIM to unibikeling Send a message via MSN to unibikeling Send a message via Yahoo to unibikeling
hmm.. In the middle of winter, i'd say unicycle in your garage if you have one. If you live in an apartment or something, just try and find a parking garage or something, or go unicycle in the snow, that always works, try to find some sticky snow
__________________
"I'll learn the landing once i do the takeoff" - me

Sixsixone - Great gear for all riding!-My Videos

Sprite Off Winner 08~
unibikeling is offline   Reply With Quote
Old 2008-01-19, 04:34 AM   #3
Val88
Aspiring Unicyclist
 
Join Date: Dec 2007
Location: Ottawa, ON, Canada
Age: 24
Posts: 82
that makes sense. I suppose I could always just do it in the snow outside. Not much either, so the wheel should be able to handle it. Still curious if there's a really good spot some Ottawa unicyclists have found though.
Val88 is offline   Reply With Quote
Old 2008-01-19, 09:19 PM   #4
Val88
Aspiring Unicyclist
 
Join Date: Dec 2007
Location: Ottawa, ON, Canada
Age: 24
Posts: 82
No one else? I'm simply curious, and any help is appreciated.

I apologize for bumping my own thread as well, I'm just getting desperate
Val88 is offline   Reply With Quote
Old 2008-01-19, 09:32 PM   #5
Danni
Daniel Cormeau
 
Danni's Avatar
 
Join Date: Aug 2006
Location: Calgary, AB, Canada.
Age: 21
Posts: 2,089
"I've gotten to the point now where I can roll forward comfortably, can almost start idling, and am interested in practicing freemounting. The hallway in my house is much too small now to practice anything (not to mention too fragile), so this is mostly for the other Ottawa unicyclists. Where's the best place to practice this time of the year?"

I practice still stands in my room. I have a 4ftx4ft area cleared, which is enough for me. Practice anywhere devoid of sharp/valuable objects. Use your common sense.

"My second question, I have a Norco 20" MUni, completely stock except for the saddle. I'm going to assume it's built tough since it's meant for muniing, but I'm wondering how much torture it can take. I've heard it isn't the strongest out there, but should it be ok to handle drop after inevitable drop while practicing free mounting? I'm going to have to do it anyway, but I'm just wondering if I should put some money aside for new parts to replace the broken ones."

Dropping from freemounting is fine. You can drop your unicycle hundreds and hundreds of times until the saddle bumpers break/ wear out.
I had this exact same norco unicycle. It is not a muni unicycle, even if it says so. Although it can be used as a muni, don't do jumps higher than 2ft until you have the money to replace the cheap hub/cranks. I bent mine, then a few months later broke them on a 4ft drop (I weighed 100lbs then) and twisted my ankle really good. Change out that crankset before you start doing anything big. The Kris Holm Moment crankset is advisable.
Also, you may have noticed that your seat is like a cresent moon. This is the "old school" style seat, which freaking sucks. It wedges and chafes. It would be a good idea to get a new flatter seat.

Last edited by Danni; 2008-01-19 at 09:35 PM.
Danni is offline   Reply With Quote
Old 2008-01-19, 10:08 PM   #6
Val88
Aspiring Unicyclist
 
Join Date: Dec 2007
Location: Ottawa, ON, Canada
Age: 24
Posts: 82
Quote:
Originally Posted by Danni
Also, you may have noticed that your seat is like a cresent moon. This is the "old school" style seat, which freaking sucks. It wedges and chafes. It would be a good idea to get a new flatter seat.
Already did. Under recommendation from here, I bought the KH Freeride Fusion seat. Much better I might add. Also, thanks, I'm going to just keep doing what I'm doing. Once the streets clear up a bit I'll head out.
Val88 is offline   Reply With Quote
Old 2008-01-19, 11:39 PM   #7
saskatchewanian
ERIC P
 
saskatchewanian's Avatar
 
Join Date: Jan 2007
Location: Denare Beach, Saskatchewan, Canada
Age: 27
Posts: 5,244
Send a message via MSN to saskatchewanian Send a message via Skype™ to saskatchewanian
I also learnt in the winter. Where I found worked best for learning was outdoor skating rinks because they were nice and flat and did not have snow to throw you off.

My biggest problem with skating rinks were that they were sort of small for really riding around to much. This shouldn't be to much of a problem for you since you guys have the largest outdoor skating rink in the world.
Stud up your tire and go hit the ice.
saskatchewanian is offline   Reply With Quote
Old 2008-01-19, 11:52 PM   #8
Val88
Aspiring Unicyclist
 
Join Date: Dec 2007
Location: Ottawa, ON, Canada
Age: 24
Posts: 82
I didn't even consider that. How would I go about studding my tire then? I always assumed it was permanent.
Val88 is offline   Reply With Quote
Old 2008-01-19, 11:59 PM   #9
saskatchewanian
ERIC P
 
saskatchewanian's Avatar
 
Join Date: Jan 2007
Location: Denare Beach, Saskatchewan, Canada
Age: 27
Posts: 5,244
Send a message via MSN to saskatchewanian Send a message via Skype™ to saskatchewanian
There are a few difrent ways to stud a tire, There is a couple threads about studded tires but I don't think that there is a really good tutorial on studding a tire on this site, but you might be able to find one on a MTB site.

You can "unstud" a tire but it is generally better to just have two tires.

I will find you one of those threads

This thread might be helpful, There were a few things that needed to be fixed with his original design so read the whole thing.
I am going to go and make a proper tire studding tutorial tomorrow

Last edited by saskatchewanian; 2008-01-20 at 12:08 AM.
saskatchewanian is offline   Reply With Quote
Old 2008-01-20, 12:53 AM   #10
Val88
Aspiring Unicyclist
 
Join Date: Dec 2007
Location: Ottawa, ON, Canada
Age: 24
Posts: 82
Much thanks. This is going to come in handy.

I'm still astounded at how nice this community is . Can't wait till I can ride well.
Val88 is offline   Reply With Quote
Old 2008-01-20, 01:14 AM   #11
unibikeling
Vendetta Against Freestylers
 
unibikeling's Avatar
 
Join Date: Apr 2007
Location: Cold Spring, Stearns County, Minnesota, USA
Age: 20
Posts: 3,165
Send a message via AIM to unibikeling Send a message via MSN to unibikeling Send a message via Yahoo to unibikeling
yeah, unicyclist.com is amazing for any help you need. also, go to some neighborhoods that are sorta designated for senior citizens, they usually have their sidewalks salted and stuff. It can work nicely.
__________________
"I'll learn the landing once i do the takeoff" - me

Sixsixone - Great gear for all riding!-My Videos

Sprite Off Winner 08~
unibikeling is offline   Reply With Quote
Old 2008-01-20, 01:25 AM   #12
Jerrick
King of Carnies
 
Jerrick's Avatar
 
Join Date: Feb 2006
Location: Spokane, WA
Age: 23
Posts: 9,744
Send a message via MSN to Jerrick
Quote:
Originally Posted by unibikeling
yeah, unicyclist.com is amazing for any help you need. also, go to some neighborhoods that are sorta designated for senior citizens, they usually have their sidewalks salted and stuff. It can work nicely.
That salt can be bad for your unicycle parts though.
__________________
Just bumming around MR~~~~~~~~~Team Forrest~~~~~~~~~Team Dirty Bird!~~~~~~~~~~~~~~~
Check out my Band.~~~~~~~~~~~~~~~!Quack!~~~~Team Spencer!~~~Member of the MRIS.
Want some advice? Do better.
~Jerrick
Jerrick is offline   Reply With Quote
Old 2008-01-20, 02:00 AM   #13
BurnerDave
Registered User
 
BurnerDave's Avatar
 
Join Date: Oct 2007
Location: Ottawa, Canada
Age: 59
Posts: 416
Hey Val88,
I found a parking garage here in Ottawa that I practice in. It's the garage shown in my video. It's as depressing as heck to practice there for more than an hour or so, but it 300 feet long, and has barely any traffic on the weekend. I still haven't ridden outside yet since learning to ride in December!

PM and I can give you details on where it is, etc.

Dave
BurnerDave is offline   Reply With Quote
Old 2008-01-20, 07:16 AM   #14
feel the light
level 1 fat guy
 
Join Date: Mar 2007
Location: Key West, FL
Posts: 2,523
I started riding last March

I found the best way to learn to idle was in my living room watching movies. I did this for the opposite reason as you. It is to hot here to ride during the day, most days. Today I went to the park at 5 PM. It was sunny and 80 F. , but after 5 there are shady spots to hang out for the hot old fat guy.

For me, I have found the ability to idle, both with the right foot down, or the left, to have taken me months to learn. It's a lot of fun, and I am getting better every day. I can ride backwards, and switch to idling with either foot down, but I idle better with the left foot down.

So in a way, as a beginner, you have a lot of options. Better riders would be bored idling watching movies, it's to easy. But if it's hard for you, you can learn important skills this winter, and watch South Park at the same time.

I kinda think most riders could learn a lot just sitting on their uni watching George Bush on the tube. How many riders are so skilled that they can sit on their uni almost motionless? If you learn perfect balance (I haven't) I think that's more then can be expected watching TV. A lot can be learned in your living room, besides how stupid is the mean average of American minds. You can actually learn a lot watching TV, at least as a rider.
feel the light is offline   Reply With Quote
Old 2008-01-20, 01:38 PM   #15
Val88
Aspiring Unicyclist
 
Join Date: Dec 2007
Location: Ottawa, ON, Canada
Age: 24
Posts: 82
I never thought of it that way. I found out that if I cleared the living room of furniture I have a fairly big spot, big enough to try freemounting and not worry about my unicycle flying off and hitting something. I'll try to practice idling more. I'll definitely try it with the tv on though.
Val88 is offline   Reply With Quote
Reply

Tags
unicycler


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
New unicycler, need help Val88 General Unicycling Discussions 14 2008-01-16 04:32 PM
I need Help jakester87 Trading Post 3 2008-01-14 08:08 PM
~COLORADO~Hello...i am a new unicycler and i need HELP kokomo General Unicycling Discussions 10 2007-12-28 02:14 AM
I need help!!! meisbach Just Conversation & Introduce Yourself 6 2007-11-21 10:55 PM
i need some help... Tyrannosaurus General Unicycling Discussions 8 2007-08-29 07:02 PM


All times are GMT. The time now is 04:24 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.
Copyright © 2001-2005 Gilby
Page generated in 0.09743 seconds with 10 queries