Seat post question

rabbithunter018 · 2006-05-15, 11:00 PM

I have a cheap unicycle that I received from my grandpa, and I haven't really stuck to trying to ride it until recently. Yes, I can now ride it, but I have grown, and the seat is not quite tall enough. I looked on unicycle.com and the traditional seat posts seem to all have the same diameter, although there are some with selectabel diameters. I do not know what brand or anything else about my unicycle; all I received was the uni and a stand. If I just get one without a selectable diameter will it fit my existing clamp? and will the seat mounting match up correctly? if not, what do I nee to know to buy the right seat post? I can mesure how tall it needs to be.
Thanks!

trials_uni · 2006-05-15, 11:07 PM

You will probably need a 22.2mm seatpost for a generic uni but just to be sure use a ruler across the top of the opening of the frame to check the inside diameter.

-Phil

rabbithunter018 · 2006-05-17, 01:28 AM

Well, I was just looking at it today and I saw that it had 22.2mm di. ingraved on it. I should have looked! thanks anyway!

2006-05-15, 11:00 PM	#1
rabbithunter018 Registered User Join Date: May 2006 Location: Ohio Age: 20 Posts: 387	Seat post question I have a cheap unicycle that I received from my grandpa, and I haven't really stuck to trying to ride it until recently. Yes, I can now ride it, but I have grown, and the seat is not quite tall enough. I looked on unicycle.com and the traditional seat posts seem to all have the same diameter, although there are some with selectabel diameters. I do not know what brand or anything else about my unicycle; all I received was the uni and a stand. If I just get one without a selectable diameter will it fit my existing clamp? and will the seat mounting match up correctly? if not, what do I nee to know to buy the right seat post? I can mesure how tall it needs to be. Thanks!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Suspension seat post question	TheBadger587	General Unicycling Discussions	1	2004-07-02 09:50 PM
Broken seat post. Question about new one	Rockey	General Unicycling Discussions	1	2003-03-16 09:00 PM
Seat post question	Monkey Juggler	General Unicycling Discussions	8	2002-09-05 07:34 PM
the seat post question	Olivier Paugam	General Unicycling Discussions	1	2001-07-12 07:55 AM
Rock Shox seat post question	Greg House	General Unicycling Discussions	0	2001-01-06 06:04 PM

2006-05-17, 01:28 AM	#3
rabbithunter018 Registered User Join Date: May 2006 Location: Ohio Age: 20 Posts: 387	Well, I was just looking at it today and I saw that it had 22.2mm di. ingraved on it. I should have looked! thanks anyway!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)