Unicyclist Community

Go Back   Unicyclist Community > Unicycling Discussion > General Unicycling Discussions

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 2018-07-08, 04:44 AM   #1
rrurban
Unicyclist
 
rrurban's Avatar
 
Join Date: Sep 2016
Location: Monument, CO
Age: 49
Posts: 71
Tubeless

I recently went tubeless on a 27.5x42mm Dominator 2 rim and 27.5 x 3.0 Schwalbe Nobby Nic. I run it at 24 psi and love the feel but I just rode 5 miles of downhill and the tire burped 5 times. It didn't actually lose a noticeable amount of pressure but I'm concerned that I'll eventually get a flat. Does anyone else run a tubeless set-up and what are your experiences with it?
__________________
Rob Urban
KH 29 Schlumpf
Nimbus 27.5 Oracle
Nimbus II 26 Muni conversion
rrurban is offline   Reply With Quote
Old 2018-07-08, 07:11 AM   #2
Fat D
Unicyclist
 
Join Date: Aug 2017
Location: Warwickshire UK
Posts: 51
Hi,

I run a Duro Crux (29 x 3.25) on a Mavic EN827 rim. I run it down at 15psi with no issues so for.
Fat D is offline   Reply With Quote
Old 2018-07-08, 12:54 PM   #3
haskinsc
'17 Mt. Washington Gold Medalist
 
Join Date: Jan 2012
Location: Gaithersburg, MD
Age: 50
Posts: 153
Blowout

I experimented with tubeless a few years ago on a 29" Dominator 42mm rim and Stans sealant. Can't recall the tire at the moment but it blew out landing a 8-inch drop (not very high) onto an off-camber surface. The tire didn't rupture, it just folded off the rim.

I suspect that most tire sidewalls are not sufficiently strong enough for muni with all the weight on one tire. They're designed for bikes where the weight is more distributed.

Anyway, that blowout ended my tubeless experiment.

- Cheers
haskinsc is offline   Reply With Quote
Old 2018-07-09, 07:16 AM   #4
kunstrasen
Unicyclist
 
Join Date: Feb 2015
Location: JŘchen, Germany
Age: 49
Posts: 197
Hi,

I run almost the same tire tubeless: Nobby Nic 27,5 x 2.8, Apex (reinfored sidewalls) with 1,1 bar on a Dartmoore revolt rim (Mtb DH rim). I do not have any burping , as I use the Schwable Procore system.
kunstrasen is offline   Reply With Quote
Old 2018-07-09, 10:55 AM   #5
Vogelfrei80
Beginner
 
Join Date: May 2017
Location: Italy
Posts: 136
Quote:
Originally Posted by rrurban View Post
I recently went tubeless on a 27.5x42mm Dominator 2 rim and 27.5 x 3.0 Schwalbe Nobby Nic. I run it at 24 psi and love the feel but I just rode 5 miles of downhill and the tire burped 5 times. It didn't actually lose a noticeable amount of pressure but I'm concerned that I'll eventually get a flat. Does anyone else run a tubeless set-up and what are your experiences with it?
What kind of tubeless conversion did you try? I'm using the "cutted" small inner tube instead of the strip and it is going flawless since 2 months, but I ride pavements nor any drop or trick. Veetire Speedster tire, 26" twofour disc rim with cutouts, rim strip, 20" inner half tube, sealant applied with care also on the lower part of sidewalls
Vogelfrei80 is offline   Reply With Quote
Old 2018-07-09, 02:52 PM   #6
pstrick
Unicyclist
 
pstrick's Avatar
 
Join Date: Nov 2012
Age: 44
Posts: 137
I think the Dominator 2 may not be the best rim for running tubeless. I've used a Velocity Blunt 35mm for a few years on a 29" and 26", both with Schwalbe Hans Dampf and have never gotten a flat. Yes, there can be some burping on off-camber lands. It adds another factor to consider for me when planning my lines. Whereas with my 26" Hatchet and big tire, I can land off camber and not think about it.
__________________
To learn anything, there is simply no substitute for time in the saddle
pstrick is offline   Reply With Quote
Old 2018-07-09, 02:58 PM   #7
Alice Arctan
rhymes with dark tan
 
Alice Arctan's Avatar
 
Join Date: Feb 2013
Location: anglophone North America
Posts: 257
Magic Mary on Blunt 35, Floater on Rolling Daryl, no probs.
Alice Arctan is offline   Reply With Quote
Old 2018-07-10, 08:55 PM   #8
MrImpossible
Unicyclist
 
MrImpossible's Avatar
 
Join Date: Dec 2011
Location: Atlanta, GA
Age: 57
Posts: 367
I run tubeless on my 27.5+ QU-AX, which comes with a tubeless ready rim, and a 3.0 WTB Bridger tire, also tubeless ready, but I had to add a split tube liner to make it work. Without the liner I got a lot of burps.

I couldn't get my 26" Nimbus with the Dominator 2 rim to work, even with a split tube liner. Burps galore. That one was using a 2.8 WTB Ranger tire.
MrImpossible is offline   Reply With Quote
Reply

Tags
tubeless


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Tubeless knoxuni General Unicycling Discussions 23 2011-03-30 07:03 PM
Tubeless 36 ??? Tucson Uni General Unicycling Discussions 6 2010-12-04 02:23 AM
Tubeless TA, anyone? joshben General Unicycling Discussions 16 2009-03-30 10:17 PM
Tubeless, anyone? JesseG General Unicycling Discussions 15 2008-10-21 12:05 PM
tubeless? snuffiluffigus General Unicycling Discussions 3 2006-03-28 09:48 PM


All times are GMT. The time now is 10:38 PM.


Powered by vBulletin®
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Copyright © 2001-2016 Gilby
Page generated in 0.07347 seconds with 11 queries