Unicyclist Community

Go Back   Unicyclist Community > Unicycling Discussion > General Unicycling Discussions

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 2018-08-03, 09:31 PM   #1
Saul_nova
Unicyclist
 
Join Date: Dec 2006
Location: Northern Virginia, suburb of DC, America.
Posts: 29
Is my uni seat too asymmetrical to learn on?

I have a Club 20" that I ordered to learn unicycling with. All seems good with it, except that the seat tilts slightly upward on the left side. Is this going to make it harder to learn with? Should Unicycle dot com have discarded this seat and included one with a straighter post interface before shipping it to me? The seat is not one with rails on the bottom. The interface on it is just a short vertical hole that the seatpost sticks into. The tilt on this seat is not huge but, is visually noticeable as I try to align the seat with the rest of the cycle. Is this going to make learning to ride harder than it should be? Unicycling seems to depend a lot on how the rider sits in the seat. Thanks for reading this noob's post.

Edit:
Actually, the interface for the seatpost is not merely just a hole, but a bracket (with a hole) that's fastened to the seat via four screws.

Last edited by Saul_nova; 2018-08-03 at 09:42 PM.
Saul_nova is offline   Reply With Quote
Old 2018-08-03, 09:38 PM   #2
elpuebloUNIdo
Viva la revolucion!
 
Join Date: Jul 2014
Location: Aliso Viejo, California
Age: 50
Posts: 1,050
As a beginner, I think you're going to be riding in the "cradle" of the seat, so that would minimize the effects of the asymmetrical seat. There are some threads on this forum regarding flattening out seats. I assume the same techniques used to flatten a seat could also be used to fix the crookedness of your seat. Good luck!
elpuebloUNIdo is offline   Reply With Quote
Old 2018-08-03, 11:26 PM   #3
JimT
Unicyclist
 
JimT's Avatar
 
Join Date: Jul 2017
Location: Pacific Northwest, USA
Age: 69
Posts: 199
I wouldn't think it would hurt but it should be easy to add a couple washers between the seat and the seat post on the low side. You should be able to find thicker or thinner washers or use multiple washers as needed to level it up.
Jim
JimT is offline   Reply With Quote
Reply

Tags
asymmetrical, learn, seat, uni


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
How many is too many - Uni build No5 or is it 6??? Feisty General Unicycling Discussions 51 2012-12-04 03:52 PM
Another noob ? My seat turns whenever my uni hits the ground. Wrong size post? Clamp? Nakedbabytoes General Unicycling Discussions 4 2012-10-21 11:27 PM
Hoping to convert this wheel so I can get back on my feet, or uni. ha derektrain General Unicycling Discussions 0 2011-09-30 09:37 PM
what new things should i waste my money on for my uni? delta 224 Just Conversation & Introduce Yourself 22 2011-04-24 10:38 PM
What is easiest wheel size to learn on for an adult? slackercruster General Unicycling Discussions 3 2011-04-04 03:09 PM


All times are GMT. The time now is 05:52 PM.


Powered by vBulletin®
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Copyright © 2001-2016 Gilby
Page generated in 0.05443 seconds with 12 queries