Unicyclist Community

Go Back   Unicyclist Community > Unicycling Discussion > General Unicycling Discussions

Reply
 
Thread Tools Search this Thread Rating: Thread Rating: 2 votes, 5.00 average. Display Modes
Old 2014-10-20, 06:53 PM   #1
Kiwi Earl
Unicyclist
 
Kiwi Earl's Avatar
 
Join Date: Jan 2013
Location: Kiwiland
Posts: 99
Have you kept your first unicycle?

Sure, a lot of us expand our uni stable. So, I was wondering how many long time riders have kept their original unicycle?

If so, was it for sentimental reasons, practical reasons, simple enjoyment reasons etc? Maybe that first uni is the only one you've ever owned and has always met your needs.

So if you haven't kept it, what were the reasons that saw you let it go? Weren't sentimentally attached to it and replaced with another uni? Financial? Gave it away as a gift? Stopped riding for years then got back into it? Do you wish you could get it back?

If you do still have that original ride, how modified has it become over the years? Do you still ride it?

For my part, I am always pretty fond of things that were firsts for me. My original uni is a case in point. It gave me my first thrills so I like having it around and love riding it. I doubt I'll ever not have it.

Last edited by Kiwi Earl; 2014-10-20 at 06:55 PM. Reason: .
Kiwi Earl is offline   Reply With Quote
Old 2014-10-20, 07:19 PM   #2
Geomu
Awesome
 
Geomu's Avatar
 
Join Date: Aug 2014
Location: San Jose, CA
Age: 32
Posts: 32
My first was a Schwinn 24" which I got as a teenager for Christmas about 15 years ago. I broke it hopping curbs, but held onto it for sentimental reasons. I kept it at my parent’s house after I got married and moved out. (Not much room for broken unicycles in our apartment.) It was thrown out a few years ago when my parents moved to a smaller place. I saved the seat as something to remember her by. When my wife and I moved earlier this year she threw the seat out without telling me. She thought that it was trash. It was a piece of trash, but it was my piece of trash... Oh well.
Geomu is offline   Reply With Quote
Old 2014-10-20, 08:50 PM   #3
unibokk
Unicyclist
 
Join Date: Feb 2013
Posts: 969
Smile

I went into a basement bicycle store one day to buy a tyre and I noticed an old unicycle with a 20" wheel, hanging from the ceiling. I expressed interest so the man took it down for me to have a closer look.

There was some rust on it but not a lot so I asked the price and it wasn't cheap. I thanked the owner and went away with just the tyre and didn't really think a lot more about it.

A couple of weeks later I got to thinking about the unicycle again and I decided if the unicycle was still there that I would buy it. Of course it was still there, because who in their right mind would want to buy an overpriced rusty old unicycle. However, I got a slight reduction on the price and purchased my first unicycle.

Day after day I practised on the grass in the park, I was learning to free mount and ride all in one huge effort using the internet for instruction. I went back to the same spot so often that my wheel made a groove in the ground. The groove was quite helpful because it stabilized the wheel as I freemounted.

Suffice to say, I finally got one pedal revolution, then two and so on until I had motion and then there was no stopping me.

During my research I noticed a site called Unicycle.com U.k. and made a phone call and got talking to Roger who was very helpful and knowledgeable.

Like so many other unicyclists I built up my fleet.

Despite having a fleet of quality unicycles, I still have my first no name rusty chromed unicycle minus the viscount saddle which I replaced with a more comfortable saddle and I kept the receipt.

Why have I kept the unicycle? Well, it brings back fond memories especially that elation I got when I was able to mount, stay balanced and ride for the first time. That was one of my greatest achievements. It's also useful for teaching someone else who wants to learn how to unicycle.

Last edited by unibokk; 2014-10-20 at 08:57 PM.
unibokk is offline   Reply With Quote
Old 2014-10-20, 09:49 PM   #4
janvanhulzen
Unicyclist
 
Join Date: Sep 2014
Location: The Netherlands
Posts: 226
I still have my old 24 inch unicycle. I have worn out the tire completely despite of rotating it 1/8 revolution a few times. I have recently replaced the tire and still use it on occasion. Its like keeping your old rucksack around just because it faithfully carried your stuff on too many adventures :-). I will never be able to throw it away.
janvanhulzen is offline   Reply With Quote
Old 2014-10-20, 11:22 PM   #5
Piece Maker
Unicyclist
 
Piece Maker's Avatar
 
Join Date: Jun 2013
Location: Manchester, UK
Posts: 1,702
I still have my eBay special 24", #1 because it was a birthday present and it'd be wrong to bin it, #2 because i sometimes use it to practise easy tricks, and #3 because well, it still works, so why would I?

It's a crapheap but I've replaced most of the parts (It has the black and yellow Qu-Ax saddle that came with my 29er!) so it's solid enough for normal use. It is, however, only a 24" wheel, so can't get me anywhere very fast (nor is it strong enough to be used for the sort of MUni a 24" would be suited for) so it doesn't really leave my front garden
__________________
“It is well known that a vital ingredient of success is not knowing that what you're attempting can't be done. A person ignorant of the possibility of failure can be a half-brick in the path of the bicycle of history.”
Piece Maker is offline   Reply With Quote
Old 2014-10-21, 12:13 AM   #6
muni123
Unicyclist
 
muni123's Avatar
 
Join Date: Apr 2012
Location: Canmore, Alberta, Canada
Posts: 1,102
I broke my first one so no, I don't have it anymore
__________________
My youtube channel:CANMOREUNIPRODUCTIONS

Visit municycle.ca for all your unicycle needs
muni123 is offline   Reply With Quote
Old 2014-10-21, 01:47 AM   #7
Shmolagin
Unicyclist
 
Join Date: Jan 2013
Posts: 3,061
I wore my first unicycle out and it's now gone...
Shmolagin is offline   Reply With Quote
Old 2014-10-21, 01:51 AM   #8
cyclepath
Unicyclist
 
Join Date: May 2014
Posts: 60
The uni on which I learned broke and was tossed. It was such a horrendous piece of garbage that it should have been thrown out the minute my dad brought it home from a garage sale. But I was in 8th grade at the time and didn't know any different, and I had just watched a friend of mine learn to ride and I wanted one. So I learned on this awful thing with nylon lollipop bearings and one-piece crank on a 20" wheel. I don't know how it was possible for anyone to learn on that awful thing. I finally twisted the cranks in half and we threw it away.

At that point, dad bought me a new 24". It had real ball bearings in the cranks which was much nicer because the crank didn't slop around. The wheel was actually responsive. By today's standards it's still on the cheap side, but at the time it was a real nice machine and I was happy to have it. That was 30 years ago now and it's still the only one I have. For a lot of years I didn't ride much. I'd only get it out once or twice a year. This year I got inspired to ride more, so I dug it out, cleaned it up, and put a new tire and tube on it. I haven't ridden as much as I wanted to, but it's more than it has been in years. I did put a KH Freeride seat on it which needed a different seat post also. I'll keep the old seat and post around for the sake of it, but I'll never use it.

Lately I've been itching for another one, but only because I want a bigger wheel size. I'm not sure whether I want a 29" or if I should just jump straight to a 36". But I'll never let go of my old 24". It was my first real unicycle.
__________________
This ride was brought to you today by the letter U and the number 1.
cyclepath is offline   Reply With Quote
Old 2014-10-21, 03:06 AM   #9
ldlux
Pretty good at ridin' that thing.
 
Join Date: Aug 2011
Location: Music City, USA
Posts: 384
I still have mine, but, then, I started less than 2 years ago. It was a 24" cheapie that I bought used. Replaced saddle, seatpost, cranks, pedals, bearings, tire (twice), and tube; so pretty much all that remains original is the frame, seatpost clamp ("QR" hardware replaced with hardware store bolt/nut), and hub/rim/spokes.

I put 150mm cranks on it so I can ride in my lawn a bit and because I had them. I still have the original 127s, but I had no end of crank creak on one side until I replaced them. The bearings were probably ok as the play/noise I was addressing remained. I suspect the axle is not quite cylindrical or else the hub is going to freewheel eventually. If it comes to replacing the hub, I might convert it to a 20". Or not. If I've already got a 20" by then, it'll probably remain a 24".

It doesn't get ridden a lot now since I got my 29er. I still take it for a spin on occasion, and it is my go-to for getting the mail or, of course, doing some modest offroading in my yard.
ldlux is offline   Reply With Quote
Old 2014-10-21, 07:53 AM   #10
JerryAttrick
Age comes to those who wait
 
JerryAttrick's Avatar
 
Join Date: Jul 2006
Location: Cambridge, UK
Age: 63
Posts: 128
I still have my first unicycle, a 24" UDC trainer. I had been thinking of passing it on to other prospective learners in the area through contacts in our local circus club, but then I read this thread.

I think I'll keep it. It was a 50th birthday present from my wife and the start of my fleet of 5. For her, it represents a cheaper "male mid life crisis" than a sports car or a flash motor bike.

I rarely ride it, except to check the wheel still goes round. And to exercise on my other ones - 20" Trials and indoor, 24", 26" Muni and 29" Muni - just to make sure I can switch between wheel sizes easily.

Actually, I checked the tyre pressure this morning. It needs more air. And that's a weekend job.

Jerry
__________________
"One wheel good: two wheels bad"
George OneWheel, "Unicycle Farm"
JerryAttrick is offline   Reply With Quote
Old 2014-10-21, 08:38 AM   #11
pierrox
Unicyclist
 
pierrox's Avatar
 
Join Date: Jul 2012
Location: Between Paris, Grenoble, NY and NC
Age: 48
Posts: 1,314
The very first one I bought - it was something like 18 years ago - got me into riding a bit, but I didn't pursue enough to become a good rider then. It was one of those chrome thing with a tire getting thinner by the minute and a saddle that would be ripped apart with each upd. Nothing else existed then anyway.

When I moved out of London, the uni went to my parents and started gathering dust in the garage, classic. I tried it a few times on occasional visits, then forgot about it. My parents lent it to a neighbor to entertain their grand-son, and a few months later, their garage burnt down in a fire. With my first uni in there.

Years later, I bought my first real unicycle, a Nimbus II with a knobby tire. Pimped it up (KH Dual cranks and seat, bigger tire), but eventually sold it when a KH24 came along.

Shame about the flame incident, not that I really wanted to keep it, or use it. But it would have been fun to see how rubbish it was, now that I can ride (almost) properly!

Last edited by pierrox; 2014-10-21 at 08:40 AM.
pierrox is offline   Reply With Quote
Old 2014-10-21, 01:36 PM   #12
jaco_flans
Trials & Muni!
 
jaco_flans's Avatar
 
Join Date: Sep 2007
Location: Québec,Canada
Age: 25
Posts: 3,584
Send a message via MSN to jaco_flans
I had a very basic chrome uni from the local bike shop, it was a 20". I ended up breaking the wheel when I dropped 3 stairs. I still have the seat and the frame!

You make me wonder where could my bend hub end up...
__________________
Jakob F.
jaco_flans is offline   Reply With Quote
Old 2014-10-21, 03:13 PM   #13
Yst
Bracing Himself - Winter is Coming
 
Yst's Avatar
 
Join Date: Jul 2014
Location: Toronto
Posts: 20
Still have it, and it still rides, more or less. An awful made-in-china 24". It's of no use to me really. But I keep it as a loaner and a tester for friends and my wife. It happens to be the smallest uni I own, so until (if and when) I get a trials uni, it hypothetically could serve a niche (though not by much, since I've got a 26er).

I'm tempted to get it out of storage now, just to see how bad the machine I learned on really was.
Yst is offline   Reply With Quote
Old 2014-10-21, 05:05 PM   #14
keithb26
Unicyclist
 
keithb26's Avatar
 
Join Date: Feb 2012
Location: Buckley, Wa USA
Age: 57
Posts: 63
Still have my 24" Schwinn my parents got me for Christmas in 1973. I think they paid $55 for it. My Dad said, "That's a lot of money for something you don't even know how to ride!" It's made every move I have made. In 1986 I moved on short notice from Seattle, Wa to Reno, Nevada for a job after I graduated from college. All I took was my Softball equipment, some clothes and my unicycle. Checked it onto the plane and grabbed it off the baggage carousel. I used it as my transportation for a couple of weeks until my parents drove my car down to me. It followed me 18 months later to Phoenix, where a young lady I was dating called me one day to come over and hang by the pool and have a few beers. When I told her that I was going to grab my Walkman, and ride my unicycle over she says she almost broke up with me because, "what kind of a weirdo rides a unicycle?". She ended up married to that weirdo and she is my biggest uni fan.
I plan to take that unicycle with me when I die!
keithb26 is offline   Reply With Quote
Old 2014-10-21, 05:25 PM   #15
LanceB
This space available
 
LanceB's Avatar
 
Join Date: Oct 2012
Location: Northridge, CA
Age: 67
Posts: 1,701
^^^ Great story!!
__________________
"I'm a unicyclist. I make my own reality."
LanceB is offline   Reply With Quote
Reply

Tags
unicycle


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Do you remember your first kiss? Brian MacKenzie Just Conversation & Introduce Yourself 4 2011-07-27 11:48 PM


All times are GMT. The time now is 02:47 AM.


Powered by vBulletin®
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Copyright © 2001-2019 Gilby
You Rated this Thread:
Page generated in 0.08540 seconds with 12 queries