For Sale: USA [or TRADE] Kris Holm/Onza black hub with 165 cranks

Siddhartha Valmont · 2012-06-02, 09:14 PM

Hi,

I am in the process of revamping my unicycles (a KH 29er from 2005 and a custom 26 wheelset).

Once done, I will have the Kris Holm/Onza black splined hub from my 2005 29er no longer used. It has the usual wear and tear from a bit of cross-country and mostly road ride. I haven't ride it hard 'cause that's why the 26" wheelset is made for.

I have no picture of it now as it is still in place (can picture it though if you really want a pic) but plan to as soon as I get it off the wheelset and polished

Up for sale or for trade

Siddhartha Valmont · 2012-06-14, 11:10 PM

Finally, I have been able to make pictures now that the hub is no longer installed.

(For a higher resolution, click here).

The left crank (top one) is a bit more scratched than the right (bottom one).
Everything has been cleaned and includes all the spacers and the cranks have the self-extracting ring.

For the trades, just contact me by PM with what you have in you garage (seat post, handle bar, saddle, pedals, whatever-else...) to discuss it =)

Siddhartha Valmont · 2012-06-15, 12:26 AM

Here is a proper picture of the hub+cranks:

(For a high resolution of it, send me a PM).

hunterthompson · 2012-06-15, 04:49 AM

None of your pictures worked

Siddhartha Valmont · 2012-06-23, 03:32 PM

I know, I am running out of luck my both of my hosting accounts. And with the "no edit after 10 minutes" rule, it is even harder to keep a thread clean.

Let's give it another try:

If you cannot see the picture above, you can go directly to this webpage that display the same pic and has a link to a full resolution version:

http://allighieri.99k.org/Say-Worms/KH_Onza_Hub.html

Siddhartha Valmont · 2012-08-03, 08:10 PM

Bumping the thread out of archive oblivion

2012-06-02, 09:14 PM	#1
Siddhartha Valmont Registered User Join Date: May 2012 Location: Nearby Boston, MA Posts: 266	[or TRADE] Kris Holm/Onza black hub with 165 cranks Hi, I am in the process of revamping my unicycles (a KH 29er from 2005 and a custom 26 wheelset). Once done, I will have the Kris Holm/Onza black splined hub from my 2005 29er no longer used. It has the usual wear and tear from a bit of cross-country and mostly road ride. I haven't ride it hard 'cause that's why the 26" wheelset is made for. I have no picture of it now as it is still in place (can picture it though if you really want a pic) but plan to as soon as I get it off the wheelset and polished Up for sale or for trade Last edited by Siddhartha Valmont; 2012-06-02 at 09:16 PM.

2012-06-14, 11:10 PM	#2
Siddhartha Valmont Registered User Join Date: May 2012 Location: Nearby Boston, MA Posts: 266	Finally, I have been able to make pictures now that the hub is no longer installed. (For a higher resolution, click here). The left crank (top one) is a bit more scratched than the right (bottom one). Everything has been cleaned and includes all the spacers and the cranks have the self-extracting ring. For the trades, just contact me by PM with what you have in you garage (seat post, handle bar, saddle, pedals, whatever-else...) to discuss it =) Last edited by Siddhartha Valmont; 2012-06-14 at 11:11 PM.

2012-06-15, 12:26 AM	#3
Siddhartha Valmont Registered User Join Date: May 2012 Location: Nearby Boston, MA Posts: 266	Here is a proper picture of the hub+cranks: (For a high resolution of it, send me a PM). __________________ \| My parts for trade => KH 29er XC w/ Nimbus ISIS hub, 125mm cranks & WTB Exiwolf 29x2.3 => Surly Conundrum 26in w/ LM DH, Moment hub/145mm Sinz & Purgatory 2.4, Devist8or 4.0 or Endo 3.7 => K1 Devil, Light hub w/ AlexRim DX-32 & Impact 19x2.5 Last edited by Siddhartha Valmont; 2012-06-15 at 12:29 AM.

2012-06-23, 03:32 PM	#5
Siddhartha Valmont Registered User Join Date: May 2012 Location: Nearby Boston, MA Posts: 266	I know, I am running out of luck my both of my hosting accounts. And with the "no edit after 10 minutes" rule, it is even harder to keep a thread clean. Let's give it another try: If you cannot see the picture above, you can go directly to this webpage that display the same pic and has a link to a full resolution version: http://allighieri.99k.org/Say-Worms/KH_Onza_Hub.html __________________ \| My parts for trade => KH 29er XC w/ Nimbus ISIS hub, 125mm cranks & WTB Exiwolf 29x2.3 => Surly Conundrum 26in w/ LM DH, Moment hub/145mm Sinz & Purgatory 2.4, Devist8or 4.0 or Endo 3.7 => K1 Devil, Light hub w/ AlexRim DX-32 & Impact 19x2.5

2012-08-03, 08:10 PM	#6
Siddhartha Valmont Registered User Join Date: May 2012 Location: Nearby Boston, MA Posts: 266	Bumping the thread out of archive oblivion __________________ \| My parts for trade => KH 29er XC w/ Nimbus ISIS hub, 125mm cranks & WTB Exiwolf 29x2.3 => Surly Conundrum 26in w/ LM DH, Moment hub/145mm Sinz & Purgatory 2.4, Devist8or 4.0 or Endo 3.7 => K1 Devil, Light hub w/ AlexRim DX-32 & Impact 19x2.5

2012-06-15, 04:49 AM	#4
hunterthompson Jake Join Date: Feb 2012 Location: United States Posts: 265	None of your pictures worked

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Kris Holm Moment or Nimbus Venture cranks?	deathbyunicycle	Unicycle Product Reviews	19	2012-05-05 02:16 PM
[Wanted Australia] KH moment cranks 165/137mm or 165mm	TomGozza	Trading Post	0	2012-03-13 06:33 AM
[For Sale: USA] Kris Holm 36H ISIS Moment Hub	adelman	Trading Post	2	2012-01-27 04:44 PM
[For Sale: USA] Like NEW, Kris Holm/ Schlumpf Hub	Jonahhill	Trading Post	7	2011-05-30 04:14 PM
[Wanted North America] ANY Kris Holm Hub! (working or otherwise)	magnustudios	Trading Post	2	2011-02-12 06:53 PM