Thread: nimbus x frames
View Single Post
Old 2010-02-07, 07:31 PM   #3
stewSquared
Juggle-cuber Extraordinaire
 
stewSquared's Avatar
 
Join Date: Apr 2009
Location: Pocatello, Idaho
Age: 26
Posts: 90
Questions about the Nimbus X freestyle frame on UDC USA

What size is the long neck frame (measured from crown to top of seat tube)?

The minimum inseam, 34.5 inches, leads me to believe that it might be 500mm -- 254mm (tire) + 115mm (crank) + 500mm (frame) = 879mm = roughly 34.5 inches.

Also, even if the frame is only 400mm, it doesn't make sense to me that a different minimum inseam would be given for the three different seat post sizes (200mm, 300mm, 400mm). Wouldn't you be able to fit any seat post all the way down the tube, and therefore have the same minimum inseam for all posts?

If your inseam is only, say, 33 inches, is the long neck frame not meant for you at all (by the logic above, I can't see how cutting a seatpost shorter would make a difference in the height of the unicycle)?
stewSquared is offline   Reply With Quote
 
Page generated in 0.02235 seconds with 8 queries