Unicyclist Community

Unicyclist Community (http://www.unicyclist.com/forums/index.php)
-   General Unicycling Discussions (http://www.unicyclist.com/forums/forumdisplay.php?f=3)
-   -   Anyone know anything about his mororized uni? (http://www.unicyclist.com/forums/showthread.php?t=113925)

Shmolagin 2013-11-17 10:00 PM

Anyone know anything about his mororized uni?
 
This^
http://1.bp.blogspot.com/-_XadvSaj3m...v_monomoto.jpg

It looks similar to this.
http://i.imgur.com/okqXL30.jpg

LargeEddie 2013-11-18 12:40 AM

There's enough readable text in the top photo to google a few words from it and find out lots more, but it seems to have surfaced at an auction in Daytona during Bike Week 2007. The original listing is still online here:

http://www.jwoodandcompany.com/2007/...nsignments.htm

Note that it's described as "MV Monomoto Unique Motorcycle Art" (find that phrase on the page) and they state that it is not a rideable machine. And there are lots of other things on the page that I'd much rather have. :)

Consensus seems to be that it's a hoax or spoof or parody or what have you of recent construction incorporating some vintage parts. The Zorro-looking guy with the cape in the picture might have been included there to help tip off potential bidders.

newob 2013-11-19 03:59 AM

Well what about this? There's also a youtube of it.

http://rynomotors.com/gallery/

newob 2013-11-19 04:02 AM

!

Shmolagin 2013-11-19 04:33 AM

My dad researched it and said that it was something created a while ago as art, the back story was created at that time as well. He also pointed out that if it had actually intended to be ridden the seat would be far enough forward that the head light wouldn't be pointed at the ground when you rode it.

newob 2013-11-19 09:06 PM

1 Attachment(s)
Attachment 60365

johnfoss 2013-11-20 12:43 AM

Quote:

Originally Posted by newob (Post 1610920)
Well what about this? There's also a youtube of it.

http://rynomotors.com/gallery/

I am anxiously hoping that the RYNO will make it to the market. It looks so cool, and it works! I might even buy one if it's not too crazy-expensive.

Quote:

Originally Posted by Shmolagin (Post 1610926)
He also pointed out that if it had actually intended to be ridden the seat would be far enough forward that the head light wouldn't be pointed at the ground when you rode it.

Sadly, when you look at it with that in mind, it seems all too obvious. The machine is a beauty, but even if it ran, there seems to be no balancing mechanism there; not even brakes? Even with brakes, to ride it like a wheely machine, you would apparently have to lean way forward for it to work.

LargeEddie 2013-11-20 01:18 AM

Quote:

Originally Posted by johnfoss (Post 1611017)
Sadly, when you look at it with that in mind, it seems all too obvious. The machine is a beauty, but even if it ran, there seems to be no balancing mechanism there; not even brakes? Even with brakes, to ride it like a wheely machine, you would apparently have to lean way forward for it to work.

It's also been pointed out elsewhere that the engine is rigidly mounted to a rigid frame, and yet there are springs and shock absorbers--going from the engine to the frame. Motorcycle collectors who saw it in person at that auction likely would have known right away that it was meant as a work of art, not to be mistaken for an actual historic vehicle.

And I wonder if "motorcycling bon vivant Todd Fell" as mentioned in the text might be one of the two men in the picture, someone many Daytona Bike Week attendees might have recognized.

But it is very pretty.

Ed toast 2013-11-20 01:23 AM

Quote:

Originally Posted by johnfoss (Post 1611017)
I am anxiously hoping that the RYNO will make it to the market. It looks so cool, and it works! I might even buy one if it's not too crazy-expensive.

.

It will be

Shmolagin 2013-11-20 01:31 AM

Quote:

Originally Posted by Ed toast (Post 1611022)
It will be

That depends on what he means by crazy expensive.

Ed toast 2013-11-20 01:42 AM

Yeah, tbf in my world it doesn't take much to be crazy expensive lol

johnfoss 2013-11-20 04:10 AM

Quote:

Originally Posted by Shmolagin (Post 1611024)
That depends on what he means by crazy expensive.

Quite. I do own a custom uni built around a Schlumpf hub, but don't have plans of getting a second one (for MUni) in the near future. I'd probably rather have one of those than a RYNO, but in any case, the RYNO should cost less than a full-sized motorcycle that can be ridden on expressways, I guess.

MrImpossible 2014-01-25 02:49 PM

Wired magazine has a hands-on review of the RYNO here. They like it. Shipping pre-orders in April!

But top speed is only 10 mph, looks like it's more of a Segway-style sidewalk machine than a motorcycle.

Unicyclist Lou 2014-01-25 03:32 PM

I saw a motorized uni on "Pickers" when they went to England. But the guy didn't won't to sell it, so they didn't talk about it. Did anyone see that episode and know anything about that uni?

johnfoss 2014-01-26 12:36 AM

$5,295.00. Right now they are collecting interest in an initial, small production run. Probably very small at that price. It's a little more than the original Segways, but IMHO a lot cooler looking. I hope the price will come down after they've done some larger production runs. This from their website:

"A limited, short production run, special edition Micro-cycle will be available for the first few lucky people to sign up. Expected delivery will be in the 2nd quarter of 2014 for a total price of $5,295.00. All RYNOs must be picked up at an authorized RYNO dealership where new owners will need to go through a brief training program prior to taking ownership. Initial dealerships will only be in the U.S. with a few locations on the east coast and a few locations on the west coast. All other bikes will ship after our high-volume production run, sometime in late 2014."

Who's going to be first to put up a refundable, $150 deposit for one of those?


All times are GMT. The time now is 09:54 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright © 2001-2019 Gilby

Page generated in 0.06748 seconds with 9 queries