Frames

[CKCrowe]

I have a Torker, I was wondering if a KH frame would fit a Torker unicycle?

How much would a KH frame be to buy used?

Is a nimbus frame 2 or x better for street/trails?

can you buy the DX frame how much?

This is if my frame were to break, thx.

[Émile5]

I have a Torker, I was wondering if a KH frame would fit a Torker unicycle?

How much would a KH frame be to buy used?

Is a nimbus frame 2 or x better for street/trails?

can you buy the DX frame how much?

This is if my frame were to break, thx.

If it brakes, send it to torker you'll have another one for free... (If anything hasn't change)

But:

I refused to send the frame back. It would've taken 2 weeks for me, and probably costed a total of 30$ shipping. So I just spent 50$ and got a nimbus 2 frame in 3 days. While the nimbus was on its way, my local muffler shop told me they would weld the frame for 10$. So I got it welded, and it's still holding up. But as soon as it breaks again i'm putting the nimbus 2 frame on and getting rid of the dx frame.

Also, when I emailed torker I told them i'd only want an 07 frame, and didn't want to bother with getting another 06 frame, and they basically said "we'll give you what's in stock".

[zfreak220]

you have to buy bearing shims if you want to use a KH frame. they are like 120 from darren new. not too many people are selling used KH frames.

if you don't want to spend a lot just buy a nimbus frame. you won't even need to buy a new seatpost (for KH you would).

[feel the light]

Would be to buy a KH from AEB and sell your Torker. This would be easier and cheaper then trying to turn your Torker into a KH piece by piece. Think of how individual parts are more expensive, then add in multiple shipping charges etc. It would be better to enjoy your torker until you can buy the whole KH at once.:)

[Émile5]

you have to buy bearing shims if you want to use a KH frame. they are like 120 from darren new. not too many people are selling used KH frames.

if you don't want to spend a lot just buy a nimbus frame. you won't even need to buy a new seatpost (for KH you would).

aren't Torker 25.2 and nimbus and bedford 22.2 and KH 27.2 ?

[kerosian]

nimbus is 25.2, you're thinkin yuni, which are 22.2.

[torkerdx]

nimbus is 25.2, you're thinkin yuni, which are 22.2.
not sure what you are thinking because yuni is 25.4 and so is the nimbus (not 25.2)

[wickedbob]

Nimbus uses 25.4 yuni is 22.2 DUH... YEAH GET THE NIMBUS 2 IT ROCKS I JUST GOT IT AND IT FITS REALLY CLOSE TO THE TRYE LIKE NO CLEARANCE... I love it don't bother getting a kh frame for 120 from Darren as I heard from above or 200 from ucd get the nimbus for like 40...

[Chexjc]

How strong is the nimbus II in comparison to the Torker frame?

...and will it fit the 24x3" gazz?

[zfreak220]

lots stronger, but I don't think the 24" one will fit a gazz. duro fits with little clearence. but you could buy a 26" nimbus frame and the gazz would fit. udc does that for some of their unis.

[kington99]

lots stronger, but I don't think the 24" one will fit a gazz. duro fits with little clearence. but you could buy a 26" nimbus frame and the gazz would fit. udc does that for some of their unis.


the duro fits just in a standard nimbus II, and easily in a nimbus II extra wide. Easy way to tell them apart, the standard has emtal plates welded over the tops of the legs, the extra wide has plastic caps.

[Chexjc]

the duro fits just in a standard nimbus II, and easily in a nimbus II extra wide. Easy way to tell them apart, the standard has emtal plates welded over the tops of the legs, the extra wide has plastic caps.

Does the "extra-wide" fit the Gazz?

[torkerdx]

Nimbus uses 25.4 yuni is 22.2 DUH... YEAH GET THE NIMBUS 2 IT ROCKS I JUST GOT IT AND IT FITS REALLY CLOSE TO THE TRYE LIKE NO CLEARANCE... I love it don't bother getting a kh frame for 120 from Darren as I heard from above or 200 from ucd get the nimbus for like 40...

Bedford is 22.2, yuni is 25.4, i know. a friend has one yuni. it is 25.4

wait apparently yuni is now making 22.2
kinda stupid but whatever floats their boat
so according to udc you are right.

[mornish]

yuni frames fit gazzs


at least the old ones do.

[Brian O.]

wait apparently yuni is now making 22.2
kinda stupid but whatever floats their boat
so according to udc you are right.
Yuni has always been 22.2, it is the nimbus which is 25.4. Both the Nimbus and Yuni brands are UDC.

[The Boz]

can a torker lx frame fit a k1 devil? because in cody's koxx breaker video i think he had a lx frame on his devil

[kington99]

Does the "extra-wide" fit the Gazz?


Hmm, never tried it but there was loads of room round the tyre so it might well be worth a shot.

[Émile5]

Of the subject but i will be selling a k1 frame on ebay in the next week or so so if anyones interested please bid. 25 Pound buy it now price the frame has a tiny hardly noticable dent, apart from that its fine. to find on ebay it will be under Koxx One Frame (Black) i will also have a Red koxx one seat used, with cracked handle due to some dodgy bails, a cromo seat post and some brand new seat clamps K1 in red and white more details on ebay !! cheers kieron.:)

Date Posted :30/07/07

Stop posting that in all thread.

Thanks :)

[Brian O.]

Of the subject but i will be selling a k1 frame on ebay in the next week or so so if anyones interested please bid. 25 Pound buy it now price the frame has a tiny hardly noticable dent, apart from that its fine. to find on ebay it will be under Koxx One Frame (Black) i will also have a Red koxx one seat used, with cracked handle due to some dodgy bails, a cromo seat post and some brand new seat clamps K1 in red and white more details on ebay !! cheers kieron.:)

Date Posted :30/07/07
Yeah seriously, stop posting this in everyone else's threads. Make one thread for yourself and be done with it. No one is going to want to buy any of your crap if you keep spamming it across the forums.

[CKCrowe]

how much is 25 pounds? Yea he broke his torker frame and he had it on a koxx something, I'll have to watch it, someone should try it.

[kington99]

how much is 25 pounds?


$51 (http://www.xe.com/ucc/convert.cgi)