Announcement

Collapse
No announcement yet.

Surly 24" and 26" Large Marge rims

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    I'm still after new Large Marge rims, 24" and 26", centered, 36H, DH

    Comment


    • #17
      Originally posted by smporter View Post
      I'm still after new Large Marge rims, 24" and 26", centered, 36H, DH
      Is there any reason you wouldn't use the 2.5" rims from choppersus.com? I need a 26"x65mm 36H rim for an upcoming project and if I can't find a 36H Large Marge by the time the other parts are ready I'm planning to use one of those.

      Comment


      • #18
        24" Large Marge Rims available.

        This post is old but I understand that Surly has discontinued the DH 24" Large Marge Rims. I have several available if anyone is in need.

        Comment


        • #19
          Xc with the holes drilled on the inner wall, or dh without the holes drilled on the inner wall? New, used? If used how many miles?

          Comment


          • #20
            Joe, I sent you a PM, thanks.

            Comment


            • #21
              Shannon,

              Im struggling a bit with the forum; I never really use it and am currently only able to access and reply with a phone. I sent you a teply yesterday and got an email that looked like you replied to it, but no content in the mail and no post.

              Do you use whats app?? You could teach me at +6281236790008

              Comment


              • #22
                Like new, no holes, less than 100 miles.

                Comment


                • #23
                  https://fatbiker.ru/rim.html

                  This russian website has a good range of rims (I think) for very affordable prices. Your only issue here is getting it shipped.

                  I have bought the 24" fat bike rim from them before

                  They also have 120 TPI Chaoyang 24" tyres which at the time were almost impossible to get anywhere.
                  Attached Files
                  Last edited by Pinoclean; 2017-09-18, 06:23 AM.

                  Comment


                  • #24
                    Pinoclean,
                    Last summer you posted this wheel combo under the Surly 24x4" thread "http://unicyclist.com/forums/showthread.php?t=118150&page=4"

                    Does the 80mm wide rim flatten out the tire too much to cause turning issues?
                    24"X5'4" giraffe made from child's bike
                    24"X7' giraffe made from 1/2" conduit
                    24" URC fatty
                    32" Nimbus Oracle

                    Comment


                    • #25
                      Originally posted by grizbach View Post
                      Pinoclean,
                      Last summer you posted this wheel combo under the Surly 24x4" thread "http://unicyclist.com/forums/showthread.php?t=118150&page=4"

                      Does the 80mm wide rim flatten out the tire too much to cause turning issues?
                      I haven't actually ridden it to be honest. I misplaced my cranks at the time and had a 26 conundrum also so never rode the 24. I will try and put it together and have a try to let you know, though I am not a big fat tyre rider so I may not be able to gauge good or bad turning.

                      Comment


                      • #26
                        Originally posted by Pinoclean View Post
                        I haven't actually ridden it to be honest. I misplaced my cranks at the time and had a 26 conundrum also so never rode the 24. I will try and put it together and have a try to let you know, though I am not a big fat tyre rider so I may not be able to gauge good or bad turning.
                        it's very dependent on tire pressure (hard to measure at lower pressures unfortunately), tire selection, and terrain. You'll be able to tell if it's not great. You'll try to turn and it'll go in a straight line (I call that "straight-suck") other times it can grab a slope and try and go its own way. It just feels unpredictable. I run a 4" nate on a 65mm rim and there's nearly none of that unless I drop the pressure really low and I'm on hardpack. I used to ride a larry and it was awful. A big factor seems to be how much rubber is actually touching the surface (less is better, so big knobbed tires seem to do better in my experience, but are buzzy on hardpack). If you drop the pressure too low, the tire will deform and fold, causing unintended tracking.

                        ... anyway, I think the point of all that is that you'll probably be able to tell if it's good or bad, even if you don't ride those wheels a lot. : ) a 1 or 2 psi change can make a huge difference too.
                        Steel is real! => I ride a Nimbus!

                        Comment


                        • #27
                          Originally posted by juggleaddict View Post
                          I run a 4" nate on a 65mm rim and there's nearly none of that unless I drop the pressure really low and I'm on hardpack. I used to ride a larry and it was awful. A big factor seems to be how much rubber is actually touching the surface.
                          I was thinking that 65mm was the way to go, but without really trying it out first hand it's all guess work.
                          I wish I could have tried your Nate last summer but I was too gassed from the trail, plus I don't know if we could have raised the seat enough for me.

                          29-30" just seem like too much for some of the climbs. If they made a 26x3.25 that was 27-28" I think that would fit me.
                          A 24x4 that is 26.7" is what I've been leaning to. I just hope it's not too small.

                          Originally posted by juggleaddict View Post
                          big knobbed tires seem to do better in my experience, but are buzzy on hardpack).
                          Strange.. The nightrider on my 32 buzzes a bit when I am torquing on it.
                          24"X5'4" giraffe made from child's bike
                          24"X7' giraffe made from 1/2" conduit
                          24" URC fatty
                          32" Nimbus Oracle

                          Comment


                          • #28
                            by buzz, I mean more of a rumble rather than an audible sound. The nightrider is very smooth compared to the nate. Certainly not as smooth as something like a big apple though. A 24x4 is by no means small. I like the larger wheels, but that still gets you the diameter of a normal 26er at higher pressures. You can always run 138 cranks, but I guess you get into the same issue with the hills. I ride 138s on my 24x3 (duro tire) and I like that feel. I think you'll sacrifice a little roll-over, but the big tire should make up for that. . . also, it's easier to get a hold of a used surly 24 frame. : P

                            If you're looking for an all-rounder, those 3" sizes in the 26 and 27.5 are really versitile. You get most of the benefit of the extra loft without the weight of the bigger tire. The full 4"+ tires simply steamroll over most obstacles. It's good and bad. It can certainly get you into some bad habits when you go back to a 2.4" tire.
                            Steel is real! => I ride a Nimbus!

                            Comment

                            Working...
                            X