Announcement

Collapse
No announcement yet.

USA - 28/29 (or high crown 26) frame

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • [Wanted] USA - 28/29 (or high crown 26) frame

    I am looking for a frame for a 700c road wheel that I've just finished. I posted a while back that I was looking for a 29" ISIS frame but I left that hub where it was and I've gone with a cotterless hub instead.

    So I'm now looking for a frame with 40mm (or 42mm) brackets, 100mm spacing, that is tall enough for a 28.5" wheel and at least 2" wide at the crown

    I've got the wheel temporarily mounted in a 26" Nimbus Muni frame, which has 14 5/16" vertical clearance. (Measured with the frame standing on a table, from the table top to the bottom of the seat tube.) The tire just fits so this is the minimum vertical clearance that I would need.

    I'm looking for a road frame or an older, narrower, muni frame. If you have anything that might be suitable let me know.

    Thanks,

    Martin

  • #2
    I've got an old Coker frame that is painted black. If you're interested in that, send me a PM and I'll send you some pictures.

    Comment

    Working...
    X