Announcement

Collapse
No announcement yet.

Got muni, what pads does everybody recommend?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Got muni, what pads does everybody recommend?

    Got my 24" Surly yesterday, practicing inside our house in the hallway until I get decent. About 4 hours of practice over the last 24 hours and it is going pretty well. I'd like to move it outside at some point, concrete and fences are in my future.
    What safety pads are smart for a beginner? I already know I need shin ones,as I marred my left shin on a UPD last night and wacked a pedal. I'm using my 4yo son's pee wee soccer shin guards right now but since they are the size of a playing card, this isn't a good long term solution!
    So do I need just shin or shin/knee ones?
    Elbow?
    Wrist?

    I have a helmet already.
    Brands? Packages recommended? What not to get?
    yeah, I'm a girl.

  • #2
    If you are planing on riding muni shin/knee pads are the way to go as they prevent you from bruising your knees on the crown. I've only ever used the KH ones and they are awesome, but they can get pretty hot, though I imagine most shin pads do. As for other equipment I don't think you'll need it until you start getting a bit more advanced. Wrist guards are a good idea though.
    My youtube channel:CANMOREUNIPRODUCTIONS

    Visit municycle.ca for all your unicycle needs

    Comment


    • #3
      shin knee pads are a good idea for the pedal bites
      ones that cover the back of the legg too are helpful as pedals dont mind which side they get you,

      my next suggestion would be gloves
      Im always ending up on my hands and youll get ripped to shreds after a few falls

      I also like my 661 padded 'bomber' shorts as they have some coccyx protection

      others... depends what your doing and how you'll be falling.
      personally i dont bother with elbow pads

      knowing my luck im going to trash my elbow tonight

      have fun

      Comment


      • #4
        As a beginner I also use elbow/forearm guards.

        See my recent review -

        http://www.unicyclist.com/forums/showthread.php?t=98167
        ______________________
        Nimbus II 20"
        Oracle 24"

        Comment


        • #5
          Oh, and for me a helmet (skate style) is essential, beginner or not ...
          ______________________
          Nimbus II 20"
          Oracle 24"

          Comment


          • #6
            I use KH gloves with wrist protection (some of the time, when I'm more worried about a hard fall - otherwise I have some Troy Lee DH gloves which are less trouble to put on and off). Inevitably if I don't wear gloves I fall on my hands - though they're also very handy to protect your hands when catching the uni. I use 661 Riot shin pads which provide some protection to the back of your leg - it's not solid like the front, but IME the hits you get on the back of your leg are a lot more gentler, and it suffices.

            Originally posted by muni123 View Post
            If you are planing on riding muni shin/knee pads are the way to go as they prevent you from bruising your knees on the crown.
            Is that really the reason people wear knee pads? Can't say I've ever hit my knees on the crown - I don't wear knee pads for muni (I don't normally wear shin pads either, just KH gloves and a helmet), and haven't ever regretted that - though I do fairly gentle muni compared to many on here. The first time I ever put on knee protection was when riding my new Schlumpf - where the perception is that I might fall hard as I can't run out a fall at 15mph.
            Unicycling: great for your thighs.

            Comment


            • #7
              Damage actualy depends on peadals... If you are planing use "soft" ones - you can ignore shin pads.
              But if you will use "grippy" ones with metal hex hole spikes - better use shin guards with plastic insert or plastic shin protectors. Better avoid neoperene cover on working surface.

              Here is my leg without shin guards and with Cope shin guard (I also use IXS shin/knee guards and they are deeply scratched as well):

              Well balanced person
              My Facebook page

              Comment


              • #8
                Wow, thanks for all the suggestions and pics(ouch!)

                The pedals that are on it, I planing using until they die. They are metal flats with studs that screw in and since it is used, the studs look pretty hard to get out at this point in their life. So I will deal.

                So helmet I got, so looks like definately wrist guards and shin guards. Not sure about knee ones or not, I am a marathon runner so maybe just as a precaution since I use my legs so much(and knees) that I should go full shin/knee combo. Think I'll go soft shell though, full wrap arounds seem smart.
                yeah, I'm a girl.

                Comment


                • #9
                  Definitely get ones with knee guards too if you can. Whenever I take an unplanned tumble I land on my knees which would be pretty painful if it wasn't for my shin/knee guards.

                  I also wear gloves and a helmet whenever I'm doing trials or muni. The gloves are just to protect from scraping when I fall but I've been a bit more worried about my wrists so I just ordered Harbinger wrist wraps that should give some wrist support.

                  Comment


                  • #10
                    Originally posted by HudsonAktau View Post
                    Damage actualy depends on peadals... If you are planing use "soft" ones - you can ignore shin pads.
                    What do you mean by "soft" pedals? Rubber ones? Because IME plastic pins are quite sufficient to make a mess of your legs. IIRC the bottom ones (which were a bit deeper) were made by metal pins, the top ones by plastic pins - I changed my pedals after making the first set of holes and made the second ones half an hour later! The next day I ordered some pads.

                    Unicycling: great for your thighs.

                    Comment


                    • #11
                      Originally posted by aracer View Post
                      What do you mean by "soft" pedals? Rubber ones? Because IME plastic pins are quite sufficient to make a mess of your legs. IIRC the bottom ones (which were a bit deeper) were made by metal pins, the top ones by plastic pins - I changed my pedals after making the first set of holes and made the second ones half an hour later! The next day I ordered some pads.
                      by "soft" I meant pedals as below pictured, they are not making holes or scratches, just hitting.



                      But these ones are work like hole puncher and scratching perfect as well - I using shin guards since some DMR V8 pedals made 6 holes deep to bone on my leg.

                      Well balanced person
                      My Facebook page

                      Comment


                      • #12
                        Originally posted by HudsonAktau View Post
                        by "soft" I meant pedals as below pictured, they are not making holes or scratches, just hitting.
                        They look like they have plastic pins though - my first holes were made with these:

                        but most of the holes in the picture above were made with:
                        Unicycling: great for your thighs.

                        Comment


                        • #13
                          Yowch! Mine are like the yellow ones, metal with metal pins. Luckily, my bite is just one nice round hole with a big bruise around it. Thru jeans no less! Guess when riding inside my house in a hallway, I should expect the unexpected 4yo kid popping out of a doorway. I freaked out and forgot how to dismount, chose to take the wrong foot off first, and wacked a pedal straight on. For me, riding doesn't seem to be the most difficult, dismounting correctly does.
                          yeah, I'm a girl.

                          Comment


                          • #14
                            Originally posted by Nakedbabytoes View Post
                            Yowch! Mine are like the yellow ones, metal with metal pins. Luckily, my bite is just one nice round hole with a big bruise around it. Thru jeans no less!
                            Get hard guards - these pedals will destroy any neoprene or fabric really fast. Plastic or sintetic brided material (or cevlar may be) will be much more durable and usefull.
                            Well balanced person
                            My Facebook page

                            Comment


                            • #15
                              Hard Shell knee/Shin Pads

                              Does anyone know of good hard shell knee/shin pads for unicycling? My KH pads get ripped up really fast and I still get bruises through them. I'm looking for some hard shell pads that also cover the back of the leg but haven't found any so far. Does anyone know of any?



                              Comment

                              Working...
                              X