Announcement

Collapse
No announcement yet.

New 24"/29"/36" Frame and Handle unit i made.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • New 24"/29"/36" Frame and Handle unit i made.

    Hey, i made this for a school project and thought i may as well share it here. its basically a unicycle frame, but the legs are telescopic so you can adjust the height to suit anything from a 24" through to a 36" wheel.

    The seatpost was welded straight on due to not enough time to weld on a seatpost tube etc etc, but it would have been much nicer to have an adjustable seat height aswell.

    the frame is fairly good at what it does. its not the best piece of equipment in the world but it does the job.

    and yes, there are MANY fundamental flaws. The frame is basically completely useless because to switch between wheels youd need another wheel which you would probably already have a frame for anyway. if you have it set on 36" height its perfect, but if you move it down to 24" height, the seat is way too low and you cant move it up without moving the frame up, which is then defeating the purpose of having the telescopic legs.

    Just thougth i'd post a pic of it here, might interest somebody.
    Attached Files
    maker of the happy birthday threads
    _________
    Just put the new uni together in the driveway stopped to move the car and ran over the uni.
    Felt like putting my head under the tire.
    - JustOneWheel

  • #2
    how many flaws are there?

    i take it there are a few....

    one being you have to wack it with a hammer to change the length of the frame.

    the switch between 100mm spacing and 120mm spacing for the bearings.

    no seat post to adjust.

    is that it?
    01010100 01101111 01101101 00100000 0101010001110010 01100101 01110110 01101111 01110010

    Comment


    • #3
      Originally posted by tomtrevor
      how many flaws are there?

      i take it there are a few....

      one being you have to wack it with a hammer to change the length of the frame.

      the switch between 100mm spacing and 120mm spacing for the bearings.

      no seat post to adjust.

      is that it?
      no, there are more.

      the bolts to clamp the wheel in catch your pants

      the handlebar grips dont go on nicely.

      but oh well.
      maker of the happy birthday threads
      _________
      Just put the new uni together in the driveway stopped to move the car and ran over the uni.
      Felt like putting my head under the tire.
      - JustOneWheel

      Comment


      • #4
        Gotta love the twin downtube designs!

        Comment


        • #5
          Originally posted by iridemymuni
          no, there are more.

          the bolts to clamp the wheel in catch your pants

          the handlebar grips dont go on nicely.

          but oh well.
          I think it's a work of art Owen. Nice job btw for doing a telescopic frame.
          Last edited by Hazmat; 2007-08-25, 11:21 PM.
          I am one weird and unusual Greek Cypriot Australian with a pienormous heart.

          Can't wait till this game is finally released.

          Comment


          • #6
            I see potential. There are times that you want to change wheel sizes and carting around a spare wheel occupies less space than a spare unicycle.
            The idea is sound. If you can make it so that:
            • The telescopic action is smooth and doesn't need hammering.
            • The wheel is easy to replace. Is there such a thing as a quick-release uni wheel?!
            • Handlebar needs to be detachable. Who uses one on a 24"?
            • Adjustable seat height (obviously)
            • Change the relationship between the hub, crankset and frame. Ideally, the cranks would form part of the frame and wouldn't need changing. I really don't know how you'd do this but I reckon it would make it more viable.

            I'd get a 36" to commute to work on but-for 2 very steep hill sections that I doubt I'd be able to cope with on such a big wheel. Imagine there were a backpack designed to hold a wheel of various sizes up to 36". I ride along on my 36" until I reach the steep stretch, then inside of a minute I've dismounted, adjusted the frame and seat height, swapped my wheel and stowed the 36" on my back. Away I go on a 24" or 29" to get up the hill and repeat at the top.
            The other benefit is that by developing easy removal of parts, you could make it worth while to store the uni in dismantled form and potentially making more efficient use of storage space.
            It's a limited market, but it could be fun to develop.
            Call out Gouranga and be happy!

            Comment


            • #7
              there are quick release bearing clamps available, just pm Jim_Rob and he'll be able to help you out.

              Comment


              • #8
                Originally posted by mattsmith
                I'd get a 36" to commute to work on but-for 2 very steep hill sections that I doubt I'd be able to cope with on such a big wheel. Imagine there were a backpack designed to hold a wheel of various sizes up to 36". I ride along on my 36" until I reach the steep stretch, then inside of a minute I've dismounted, adjusted the frame and seat height, swapped my wheel and stowed the 36" on my back. Away I go on a 24" or 29" to get up the hill and repeat at the top.
                The other benefit is that by developing easy removal of parts, you could make it worth while to store the uni in dismantled form and potentially making more efficient use of storage space.
                It's a limited market, but it could be fun to develop.
                I can't imagine myself having too much fun changing wheels on the go and riding up hills with a 36" wheel attached to my back.

                Comment


                • #9
                  Originally posted by Chexjc
                  I can't imagine myself having too much fun changing wheels on the go and riding up hills with a 36" wheel attached to my back.
                  It'll be all the fashion before you know it
                  The wind resistance will be a killer though.
                  Call out Gouranga and be happy!

                  Comment


                  • #10
                    Originally posted by mattsmith
                    It'll be all the fashion before you know it
                    The wind resistance will be a killer though.
                    Yeah i remember reading somewhere a while ago about when the UDC 36" Unicycle was going to come out and people were replying with "what a useless machine, it will never take off" and "I wouldn't buy it, it's hideous."

                    The weird thing is, i stay remember those phrases.

                    But now look, people are riding cokers and so forth. So Owen's idea may well go into mass production someday and i can't wait till that day comes.
                    I am one weird and unusual Greek Cypriot Australian with a pienormous heart.

                    Can't wait till this game is finally released.

                    Comment


                    • #11
                      I'm Interested...

                      Hey there,
                      I'm interested in this item you just posted, do you still have it? If so how much could I get it from you for?
                      Thanks!

                      -Nathan

                      Comment


                      • #12
                        Did you know that this thread is from 2007? And he was not selling it but just showing what he did? Look at the dates before posting!
                        Jakob F.

                        Comment

                        Working...
                        X